YouTube Bumper Ads: Specs, Costs and a Six-Second Playbook

. By Ads Daddy.

Clinic owner filming a short appointment offer

YouTube bumper ads are non-skippable videos of up to six seconds that play before, during or after other videos. Your viewer can't skip them, and you pay per thousand impressions. That makes them a cheap way to put your brand in front of lots of people. It also makes them a terrible place to explain anything.

Think of a bumper as a wink across a crowded pub. It won't close the deal. It makes someone remember you when you walk up later.

Here's how they work, what they need, how they're billed, and how to make six seconds count.

TL;DR

  • A bumper ad is a non-skippable YouTube video of six seconds or less, bought on impressions (CPM), not views.
  • Bumpers are built for reach and recall. They are not built for direct selling, so pair them with a longer ad or a retargeting step.
  • Upload a video of six seconds or under in a Video reach campaign and Google assigns the bumper format automatically.
  • One idea, mobile-first, brand in the first moments. Don't chop a 30-second ad down to six.
  • Measure reach, CPM and ad recall, not clicks. If you'd rather not run it yourself, we manage YouTube Ads for you.

Table of Contents

What bumper ads are and where they show up

A bumper ad is a short, non-skippable video ad. Google's own help pages describe it as running up to six seconds, and it can appear before, during or after another video. It shows on YouTube and across websites and apps in Google's video partner network.

They run on computers, phones, TVs and game consoles. Because they're non-skippable, everyone who gets served one sees the whole thing. That's the whole pitch.

How it differs from the other video formats:

Format Length Skippable? Best for
Bumper Up to 6 seconds No Reach, recall, reminders
Skippable in-stream Any length, skippable after 5 seconds Yes Views, consideration, storytelling
Non-skippable in-stream Around 15 to 20 seconds, depending on region No Awareness with a bit more room
In-feed / Shorts Varies Viewer chooses to watch Discovery, mobile attention

Google decides the format by the length of the video you upload. Six seconds or under becomes a bumper. Anything longer slides into another format.

Want the wider picture on video? Our guide to video advertising covers how the formats fit together.

When bumpers earn their place

Bumpers are a reach tool. Google positions them for broad awareness, and the campaigns that use them sit under the reach objective for good reason.

Here's where they shine:

  • Reminding people who already know you. A bumper is a billboard in someone's pocket.
  • Retargeting a warm audience. Show it after a longer ad has done the explaining.
  • Launches and promos. One offer, one date, one line.
  • Mobile audiences. Google's own guidance notes the short format works especially well on phones, where people watch on the go.
  • Local and regional pushes. If you want your name known across a city or state, cheap impressions help.

And where they flop:

  • Explaining a complex service.
  • Selling a high-ticket product in one hit.
  • Anything that needs a click to make sense.

If your goal is leads this month, a bumper alone is the wrong tool. Use it as the supporting act. Our ROI-first YouTube playbook for Aussie SMEs shows how to sequence formats so the spend traces back to revenue.

What the data says (and what it doesn't)

Google published an analysis of 122 bumper campaigns back in 2017. Around nine in ten drove a significant lift in ad recall, averaging about 30%. Around 70% lifted brand awareness, averaging about 9%.

Two takeaways:

  1. Bumpers are good at recall. People remember seeing you.
  2. Awareness lifts are real but smaller. Don't expect a sales spike from a bumper by itself.

Google's guidance also says combining formats beats leaning on one. Advertisers who paired skippable reach ads with bumpers saw higher recall lifts than those who bought either alone. In the 2017 data, people who'd seen a longer ad and then got a bumper remembered the ad noticeably better than those who saw only the longer ad.

So the smart move isn't "bumper or not". It's "bumper after what?"

YouTube bumper ad specs

The spec sheet is short. Six seconds doesn't leave much room for fuss.

Video

  • Length: six seconds or less.
  • Hosting: the video needs to be uploaded to YouTube. You paste the URL into your campaign.
  • Orientation: horizontal 16:9 (1920x1080), vertical 9:16 (1080x1920) or square 1:1 (1080x1080) are the recommended 1080p sizes. Minimums are 1280x720, 720x1280 and 480x480.
  • File types: MP4, MOV, MPG, WebM, ProRes and HEVC are accepted.
  • Audio: audio-only files aren't accepted. It has to be video.

Companion banner (where available)

  • 300x60 pixels
  • JPG, GIF or PNG
  • Up to 150 KB
  • Animated GIFs need a low frame rate (under 5 frames per second)

Honestly, most small businesses won't touch the banner. Get the video right first.

Design for vertical. Most of your viewers are on a phone. A vertical or square cut usually serves them better than a letterboxed horizontal one. Check the current specs page in Google Ads Help before you export, because Google updates these now and then.

What bumper ads cost and how billing works

Bumpers are bought on target CPM. You set the average amount you'll pay for every 1,000 impressions, and Google optimises bids to reach as many unique people as it can. Some impressions cost more than your target, some less.

Two things follow from that:

  • You pay for being shown, not for being watched or clicked. That's why bumpers are the budget-friendly end of in-stream video.
  • Your cost per click is a useless number here. Nobody expects a six-second ad to drive tons of clicks. Judge it on reach and recall.

What your CPM lands at depends on your targeting, your audience and how many competitors are bidding for the same people. A tight audience in a crowded industry costs more than a broad audience in a quiet one. Check the live numbers in your own account instead of trusting a blog's average. Rates shift through the year, and spikes around Black Friday and Christmas are normal.

One more quirk. Bumper views don't count as YouTube "views" in the usual ad-reporting sense, since the viewer didn't choose to watch. A click only counts if the viewer actually clicks, and a later purchase counts as a conversion rather than a view-through conversion. Set your expectations in the right columns before you build your report.

How to set up a bumper campaign in Google Ads

Here's the routine, step by step, with the spots where it goes sideways.

1. Make the video first

Cut a video of six seconds or under and upload it to YouTube. Unlisted works fine for ad use. Do this before you open Google Ads, because the campaign needs the URL.

Where it goes wrong: exporting at 6.5 seconds. It won't run as a bumper. Trim it.

2. Start a reach campaign

In Google Ads, choose New campaign, then the YouTube reach, views and engagements objective. Pick the Video campaign type and the Video reach subtype, using Efficient reach.

Where it goes wrong: picking a conversion objective by habit. Bumpers need the reach setup.

3. Choose your formats

Select in-stream (which covers bumper and skippable) and, if you like, in-feed and Shorts placements. Google assigns the bumper format on its own based on your video length.

4. Set budget, locations and languages

For Aussie businesses, set your locations tightly. A Melbourne plumber doesn't need impressions in Perth. Add a frequency cap if you don't want the same person seeing your ad six times a day. Nobody loves a clingy ad.

5. Add your video and set your target CPM

Paste the YouTube URL. Set a target CPM bid. Then pick your audience: customer lists, in-market segments, custom segments or tight topics.

Where it goes wrong: going broad "to get reach". Short ads lean on the viewer already knowing something about you or the category. Research on six-second ads backs this up: precise targeting matters more when the ad is this short, because the viewer fills in the gaps.

6. Launch, then review in a week

Look at reach, impression share and CPM. Don't judge by clicks.

This is also where plenty of owners stall. Building audiences, writing six-second concepts and reading the reports eats hours. We run YouTube Ads and the rest of the video stack for businesses so they never need to learn the platform. Our Google Ads setup guide shows the account foundations every campaign sits on.

How to make six seconds work

This is where most bumpers die. The spec is easy. The creative is hard.

1. One idea. Just one. One thing done well, two is okay, three is a mess. Pick the offer, the product or the name.

2. Don't chop up your 30-second ad. A cut-down rarely works. Treat the bumper as its own brief. Shoot it for six seconds.

YouTube Bumper Ads Tutorial and Best Practices - YouTube Bumper Ads Explained

3. Brand early. Don't save the logo for the last frame. Someone's thumb might already be hovering over the next thing. Put the brand in the first moments, and keep the important information out of the very first two seconds only if the visual is striking enough to hold them. Show the product, the face or the logo with real intent.

4. Design for phones. Big type. Close shots. Sound-on helps, but make it work with sound off.

5. Use a series. Three bumpers, each with a different line, beat one bumper shown 20 times. Think episodes, not repeats. Research on ads of ten seconds or less found the best ones lean on suggestion and shorthand instead of fully shown scenes.

6. Lean on what people already know. A bumper that assumes familiarity with your campaign can confuse cold viewers. If the viewer hasn't met you, say who you are.

7. Make it distinctive. Your colours, your mascot, your odd little sound. Six seconds is enough to plant a memory when the thing is distinctive. It's not enough when it looks like every other ad.

A quick example. A Brisbane physio clinic running a "first appointment" offer could film: a person wincing getting out of a car, a cut to them walking pain-free, the clinic name, the offer. One scene, one promise, six seconds. No "We're a family-run clinic established in...". Save that for the longer ad.

For longer-form scripting practice, our Facebook video ad scripts work as a template for the follow-up ad your bumper sends people to.

Pair bumpers with the right companions

A bumper on its own gives you recall. Bumpers in a sequence give you a path.

Here's a simple three-step setup:

  1. Reach: bumpers to a broad but relevant audience, for cheap impressions.
  2. Story: a skippable ad or a short video to people who've seen the bumper.
  3. Action: a search or lead ad to people who've engaged.

Google's own guidance recommends mixing reach formats such as skippable ads, non-skippable ads and bumpers in a single Video reach campaign so the budget is optimised across them. Bumpers also tend to sit alongside related YouTube ads well.

One limit to plan around: bumper views can't be used to build remarketing lists. So if you want to retarget people who watched, use your longer ad for that.

If you're curious about the vertical side of the platform, here's how YouTube Shorts ads work and how they differ.

Measuring bumper performance

Skip the vanity chase for clicks. Track what bumpers are built to do.

  • Reach and unique reach. How many different people saw you?
  • CPM. What did every thousand impressions cost?
  • Ad recall lift. Brand Lift studies measure whether people remember your ad. They usually need a decent budget to run.
  • Downstream numbers. Branded search volume, direct traffic and conversion rates among people who've seen the bumper.

That last one is the ROI loop. If you spent $2,000 on bumpers in a month and your branded searches didn't move, the creative or the targeting needs work. If they climbed, you've got a reason to scale.

For app campaigns, bumpers are measured as engaged-view conversions, which you can switch on in your conversion settings. Most small businesses won't need that, but it's good to know it exists.

We break down the numbers that matter in 7 proven metrics for measuring ad campaign success and why measuring engagement connects to ROI.

Common bumper mistakes

  • Using a cut-down 30-second ad. It looks like what it is.
  • Targeting everyone. Six seconds can't make up for a wrong audience.
  • Expecting direct sales. Bumpers prime. Something else closes.
  • Running one creative forever. Fatigue hits fast on short ads.
  • Judging by CTR. Wrong scoreboard.
  • Ignoring the phone. Tiny text and a wide frame waste the view.
  • No follow-up. A bumper with nowhere to go is a billboard on a dead road.

What we'd tell a mate over coffee

Bumpers get a bad rap because people ask them to do a closer's job. They're not closers. They're the opener.

When we build YouTube campaigns, we treat the six-second ad as one piece of a funnel: get remembered cheaply, follow up with something that explains, then capture the lead. That's how we approach video across Meta, Google, YouTube, LinkedIn and Microsoft Ads. The platform is only half the job. The tracking and the lead delivery behind it are what make the spend add up to revenue.

Most business owners we talk to don't want to become YouTube experts. They want phones ringing and forms filling. That's the bit we take off your plate, so you don't need to learn the platform at all.

Six seconds is short. Your ad budget isn't. Make both count.

Adrian

Let us run it for you

Bumpers are quick to build and easy to get wrong. We create, manage and optimise YouTube Ads alongside Meta, Google, LinkedIn and Microsoft Ads, so your reach spend feeds a funnel that actually ends in enquiries.

Adsdaddy

Ready to put six seconds to work? Book a call about YouTube Ads and we'll map out a campaign for your business. If leads are the goal, see how our lead generation service works. For wider context, read our guide to video ads for Australian SMEs.

FAQ

How long is a YouTube bumper ad?

Six seconds or less. Google's help pages describe them as non-skippable videos that play before, during or after another video. If your upload runs longer than six seconds, it's assigned to a different format.

Can viewers skip a bumper ad?

No. That's the defining feature. Because nobody can skip, bumpers are billed on impressions through a target CPM bid, not on views or clicks.

What size should a bumper ad video be?

The recommended 1080p sizes are 1920x1080 (horizontal), 1080x1920 (vertical) and 1080x1080 (square). The minimums are 1280x720, 720x1280 and 480x480. Because most viewers are on phones, a vertical or square cut is usually the safer choice.

Are bumper ads worth it for a small business?

Yes, when they have a job: reminding people who already know you, supporting a launch, or warming up an audience before a longer ad or a lead offer. They're weaker as a standalone sales tool. Pair them with a follow-up step and judge them on reach, recall and what happens to branded searches and enquiries.

What is the difference between a bumper and a skippable ad?

A skippable ad lets viewers skip after five seconds and can run much longer, so it suits storytelling and views. A bumper is short, can't be skipped and is paid on impressions, so it suits reach and recall. Many campaigns use both together.

Recommended